4.06108.839 EN SS TG1

Above image may be representative or a CAD rendering; see 3D model below for additional views.

PART NUMBER: 4.06108.839 EN SS TG1

If rust can be a potential problem, the Colson 4 Series stainless steel casters are your solution, handling working loads of up to 1,250 lbs. per caster. Look to the Colson 4 Series Stainless Steel casters for an ideal industrial 2″-wide solution when exposure to water or chemicals are required. Polished 304 grade stainless steel construction handles the most punishing and corrosive environments. All component parts in this caster – including spanner bushing, axle and nut, and raceway bearings – are stainless steel. Hollow axles with grease fittings along with grease zerk on swivel raceways allow for easy maintenance of each caster.

Wheel Diameter6.00 in 15.24 cm

Fastening TypeTop Plate

Fastening Size4" x 4-1/2"

Wheel MaterialSolid Elastomer

Wheel TypeEndura

Bearing TypeRoller

Capacity1100.00 lb 498.95 kg

Wheel FaceCrowned Tread

Caster TypeRigid

Wheel ColorBlack

Temperature Range-45F to +230F

FinishStainless Steel

Tread Width2.00 in 5.08 cm

Tread DetailMonoformed Elastomer

Thread GuardMetal

Bolt Hole Spacing2-5/8" to 3" x 3" to 3-5/8"

Mounting Bolt Diameter3/8"

Mount Height7.50 in 19.05 cm

Hardness63(+/-5) Shore D

Wheel CategoryPolyurethane


Thread Guard


Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

4.06108.839 EN SS TG1